The bolt pattern for 2013 ford fusion is an important specification that determines the compatibility of wheels. If you are looking to replace or upgrade your wheels, knowing the correct bolt pattern is crucial. The bolt pattern affects how the wheels attach to the vehicle and ensures safety and stability.
What is a Bolt Pattern?
A bolt pattern refers to the arrangement of lug holes on a wheel. It is typically expressed as two numbers, such as 5×108. The first number indicates the number of lug nuts, and the second number represents the diameter of the circle formed by the lug holes, measured in millimeters. For the 2013 Ford Fusion, the bolt pattern is 5×108.
Bolt Pattern for 2013 Ford Fusion
The 2013 Ford Fusion has a bolt pattern of 5×108 mm (5×4.25 inches). This means it has five lug nuts arranged in a circle with a diameter of 108 mm. Understanding this specification is essential when purchasing new wheels to ensure proper fitment.
Other Important Wheel Specifications for 2013 Ford Fusion
Besides the bolt pattern, several other specifications are important when selecting wheels for your 2013 Ford Fusion:
- Center Bore: 63.4 mm
- Lug Nut Thread Size: M12 x 1.5
- Offset Range: 35-55 mm
- Stock Wheel Size: 16 to 19 inches (depending on trim level)
Why is the Bolt Pattern for 2013 Ford Fusion Important?
Using the correct bolt pattern ensures that the wheels are securely attached to the hub. If the bolt pattern is incorrect, the wheels will not fit properly, which can lead to serious safety issues, including vibrations, poor handling, and even wheel detachment.
How to Measure Bolt Pattern for 2013 Ford Fusion
If you want to measure the bolt pattern yourself, follow these steps:
- Count the number of lug nuts. The 2013 Ford Fusion has five.
- Measure the distance from the center of one lug nut to the outer edge of the lug hole directly across from it.
- Convert the measurement to millimeters if necessary. The correct measurement should be 108 mm.
Compatible Wheels for 2013 Ford Fusion
If you are considering aftermarket wheels, it is essential to check compatibility with the 5×108 mm bolt pattern. Some vehicles with the same bolt pattern include:
- Ford Escape
- Ford Edge
- Volvo S60
- Lincoln MKZ
Always verify other specifications such as offset and center bore to ensure a perfect fit.
Common Mistakes When Choosing Wheels for 2013 Ford Fusion
When selecting wheels, avoid these common mistakes:
- Ignoring the bolt pattern: If the bolt pattern is incorrect, the wheels will not fit.
- Incorrect offset: The wrong offset can cause handling issues.
- Wrong hub bore size: If the center bore is too small, the wheel will not fit over the hub.
- Using incorrect lug nuts: The wrong thread size can lead to loosening or stripping of threads.
How to Install New Wheels on a 2013 Ford Fusion
Tools Needed
- Jack and jack stands
- Lug wrench or impact wrench
- Torque wrench
- Wheel alignment tool (optional)
Installation Steps
- Loosen lug nuts before jacking up the car.
- Jack up the vehicle and secure it on jack stands.
- Remove the old wheels and clean the hub surface.
- Align the new wheels with the bolt holes.
- Hand-tighten the lug nuts in a star pattern.
- Lower the vehicle and tighten the lug nuts to the recommended torque (100-110 lb-ft).
- Check for proper fitment and take a short test drive.
Conclusion
Understanding the bolt pattern for 2013 Ford Fusion is crucial when replacing or upgrading wheels. With a 5×108 mm bolt pattern, it is important to choose compatible wheels to ensure safety and performance. Always consider other factors such as offset, center bore, and lug nut size when selecting new wheels. Following proper installation procedures will ensure a secure fit and a smooth driving experience.
